ALL WORN OUT??
When we take our holidays it is suppose to rejuvenate us but some of us go just as hard so whenn we get back to work we are just as worn out or even more so.

Well some of us do that with our machinery also. At Bi-Metal we can help keeping your most wearing parts last longer. We offer hardsurfacing products and special filler welding rod to fix those hard wear parts. Here is just a small sample of some of the wear resistant products we carry.

 

For more information check this out http://www.eutectic-na.com/

Hot Product  Diversification
at Bi-Metal for You

Yes, we have a variety of products available, but first another update to our trial product testing.

The first disc was described to be used for cutting off. It was a flat 6” x .045 disc (see review below). We sent it to a welding fabrication shop which does a lot oilfield and industrial welding work. Here is the tester’s feedback.

The second disc was described to be used for grinding off. It was a flat 6” x 1/4 disc (see review below). We sent it to a welding fabrication shop which does a lot oilfield and industrial welding work. Here is the tester’s feedback.

We thank Kim at Tack Welding Ltd. for their input.

So now we still have another four products we have sent out for testing. If you have any interest in any of our tested products give us a call or email.

Back to Hot Product Diversification 
at Bi-Metal for You

As most people out in the industrial world, we are known for our excellent band saw blade products and service. We are thrilled that everyone knows us for that but some over look the other items, we provide like the Canadian abrasive products, our USA cutting tool line, Swedish welding wires and other Czech welding consumables plus the safety side of things like Canadian and USA gloves, fall protection, visors,  etc.

One exciting offer we are into is a free Thermacut replacement torch suitable for Hypertherm® HPR130/260® systems. ®, HPR130®, HPR260® are the Registered Trademarks of Hypertherm, Inc. Thermacut is in no way affiliated with the above-named manufacturer(s). Call us for info on this offer.

We at Bi-Metal Industrial Products Inc. stand behind all the products we provide and don’t forget the service as we don’t quit with finding a product that satisfies the needs of our customers. 

Just an update on the blog on Trial Products from July 11, 2013. The second diamond disc was described to be used for grinding hard surfacing. It was a flat 5” x 1/4 disc. We found out that the hub that was giving us some grief could be totally remove thus we could us the standard mount to the grinder which is most cases is more favorable to most users..We again thank Trevor and Brad at Plasma-Tec for their input. The other 2 tests are still under way. Now to this weeks issue.

 Hand Wear Safety

Hand and finger safety is a big issue in the workplace. Finding the right fit and apparel is not an easy thing. The fit has to be right and the fabric has to fit the jobs that are being done. The other day I was at a customer’s location and the person I was with was looking for a glove, to take heat yet nimble enough to put a small nut onto a screw. They told me that one supplier’s catalogue had 50 pages of just gloves. That’s a lot of different gloves. So you see, talk to someone who has the knowledge to find the right pair of gloves for your applications and protect those precious fingers and hands. Remember too that a $1.00 pair of gloves doesn’t always do a great job. They could be a hazard and cost you in the long run.

At Bi-Metal, we can help you with your needs, from neoprene to insulated gloves.

See promo for some special gloves we stock following this blog.

 

       

Bi-Metal representative can further help you at 780-440-4002 or 1-888-440-4002, email info@bimetalinc.com.

We hope the above information is useful.

 More Links that can help you with this topic: http://www.hrsdc.gc.ca/eng/labour/publications/health_safety/hands/page00.shtml

Also don’t forget to check out our other product promo pages at http://www.bimetalinc.com/promos.htm

Trial Products Reports

At Bi-Metal, we do trials on most our products, to see if we really want to introduce these new items to our clientele. When we do this we get to know the positives and negatives of these products. The testers usually focus right away on the cost of the product, even though they don’t pay for them. On great products the costs are usually recovered at the half way point or closer the end of the products lifetime. People that usually complain about costs of new products are not looking at the complete picture. Here are some thoughts that need to be considered when trying something new.

1. Is it safe? (health wise and injury wise)
2. Does it have CSA approval? (if required)
3. Is product environmentally friendly? (Can it be recycled?)
4. Does it improve labor productivity over present product? (time)
5. Does the product do the job it was designed for being done just as easy as or better than existing product?
6. What about damage to product while being used?

We just lately have done or in the middle of some trials on 3 different diamond grinding discs and the new BI-4002 series turning inserts.

The first diamond disc was described to be used for grinding and cutting off. It was a flat 5” x .140 disc (see review below) and is double sided. We sent it to a piping shop which does a lot of pipe welding work. Here is the tester’s feedback.

We thank Ken and Rusty at Academy Fabrication for their input. They did have some other comments when we picked up the test sheets like “This disc would do really well to cut steel grading and may do a lot better in a steel fabrication place.” Over all down side the surface area on side of disc is only approximately 5/8” deep and for pipe beveling it should be at least 1-1/2” deep.

The second diamond disc was described to be used for grinding hard surfacing. It was a flat 5” x 1/4 disc (see review below) and is double sided. We sent it to a hard surfacing shop which does a lot of specialized oil down hole tooling work. Here is the tester’s feedback.

We thank Trevor and Brad at Plasma-Tec for their input. They did have some other comments when we picked up the test sheets like “This disc is way better than your competitors but see if you can get the hub attachment redesigned. This is much better than using conventional abrasive stones.” Over all down a good product except hub.

If you have any interest in any of our tested products give us a call or email.

Knocking Enhanced Products

The other day when I was doing a sales call on a customer, I was trying to introduce them to an enhanced product. I had gotten relativity a quick “NO” to the suggestion of an alternate product. I asked the person why they weren’t interested and the response was, “we have tried knock offs before and they didn’t work as well as the OEM items.” I apologized to the person (as I do sell some items that are direct copies of off-patented products) but I told this poor soul that it was reengineered and it does a better job than the OEM product. “That can’t be. We don’t use knockoffs here” was the response again. I explained that these items are not knockoffs again and don’t even look the same, but it was to no avail. I was then given the run around how they have a contract to buy the OEM pieces from someone else and it went on and on. The wall was up. I felt really sorry for people like this, as the product, really improves what it does by no less than 25% and it isn’t even made in an eastern country. This happened to be a procurement manager for a large international company. Can you imagine someone throwing away 25% or more of something? Not even trying it. That’s $0.25 of every $1.00 this company is losing out on. I wonder what would happen to this person, if the workers and his superiors found out that their job could be done 25% more efficiently. Oh well , still made a sale selling OEM stuff but its the effectiveness of a product that bugs me, that’s my rant this week.

Now for something different check this out.  http://www.knockingoff.com/

Fascinating Fastener Tooling

Ever look for a fastening tool and can never find the exact thing that would work so you make up something and it works kind of, then it takes you hours to do the job, but if you had the right item it would have taken 5 minutes. Been there done that.
We found a company that has some real innovative tools for fastening items and that is WERA TOOLS. They have items that are really user friendly, like the screw driver tips that actually grip the screw head or a ratchet, which’s head articulates 180 degrees.
The other innovative ideas they have are sets of different drivers in easy and useful containment holders eg. driver and bit holder.
This is a useful, innovative and excellent product line and is the way to go.
A Bi-Metal representative can further help you at 780-440-4002 or 1-888-440-4002, email info@bimetalinc.com.

We hope the above information is useful.

More Links that can help you with this topic: http://www-us.wera.de/home_us.html

Also don’t forget to check out our product promo pages at http://www.bimetalinc.com/promos.htm

Maintenance

 

Maintenance is one of the least thought of items in most shops. When something breaks down most shops are running around like the image above. Maintenance is a key issue that must be considered when purchasing a piece of equipment.

For instance the other day we were called to take a look at a vise on a machine. When the sales representative arrived he couldn’t believe the mess this machine was in. The machine was sold to the customer in 2006. It looked as if they had never cleaned the machine since new. Metal material scraps and metal filings were heaped all around, in and on the machine. There was just an aisle to get to vise wheel and an aisle to load and unload material into the machine.

The Bi-Metal Representative did not want to annoy the customer so he did some adjustments to the vise to make customer happy, however did mention to them that a good cleaning of machine and surroundings was in order. This situation was not just a maintenance one but a safety issue also. We did some additional help with them, like advice on maintenance and some new parts that were required to get their machine back to a safe state.

   A lot of maintenance issues can be avoided with regular cleaning, oiling and so on. So maybe it is a good idea to check out the manuals in your shop or even at home, to see what preventative measures you can take to prolong the life of your equipment. This helps keep the equipment in good working condition which makes it safer to use by employees and yourself.

  

            A Bi-Metal representative can further help you at 780-440-4002 or 1-888-440-4002, email info@bimetalinc.com.

We hope the above information is useful.

More Links that can help you with this topic: 

                                                            http://www.aplmachine.ab.ca/

Also don’t forget to check out our product promo pages at  http://www.bimetalinc.com/promos.htm