Monday, December 16, 2013
























Holiday Hours

Closing at 12:00 Noon on December 24, 2013
Closed December 27, 2013
Open December 30 thru 31, 2013
Closed January 1, 2014


HAPPY HOLIDAYS

Monday, December 9, 2013

Thank goodness the cold is over for a bit. Spring is still way off. The holiday season is upon us now with everyone bustling to get their gifts and other items together. If you are stuck for gifts ideas, think tools for your energetic fixer or repairer, for home or the shop. Come to see us and we can give you many ideas. Happy Holidays

Saturday, November 16, 2013

Now that winter is upon us, let us help you with the winter chores, around home, to your business. We can help you with keeping warm, to items that will help in getting rid of that white stuff on the ground. See our promotions page.
We have expanded our product line now to include power tools. Check us out at www.bimetalinc.com. 

Friday, October 25, 2013

HSS ANNULAR CUTTER VS CARBIDE ANNULAR CUTTER

Today we are going to talk about economics on HSS verses CARBIDE annular cutters used with a magnetic drill.
Let us start with approximate labor rate (Alberta) for a journey welder at $40.00/hr. We are drilling 240 holes in ½” mild steel.
A Champion annular XL100 1” x 1” HSS plain cutter runs on average $85.25 each.  The ChampionXL100 has 20% longer life then normal HSS annular cutters due to the coating. Speed for this cutter is approximately 350 rpm in mild steel. Average hole life of cutter before requiring sharpening is 40 holes. Sharpening cost is about $40.00.
A Champion annular CT150 1” x 1-3/8 Carbide cutter runs on average $118.85 each.   Speed for this cutter is approximately 610 rpm in mild steel. Average hole life of cutter before requiring sharpening* is 240 holes. (*if carbides are not damaged) Sharpening cost is about $80.00.
Now if you’re drilling ½” thickness mild steel material, the time for HSS cutter to go through material is approximately (depends on force applied) 30 to 40 seconds.  So let’s do 30 seconds per hole to simplify things. 240 x 30 seconds is 7200 seconds divide by 60 is 120 minutes which is 2 hours of cutting time. That is .67 per minute labor or $80.00, 6 cutters required at $85.25 each = $511.50 and then sharpening after the job.
If you’re drilling ½” thickness mild steel material, the time for Carbide cutter to go through material is approximately (depends on force applied) 10 to 20 seconds. So let’s do 20 seconds per hole to simplify things. 240 x 20 seconds is 4800 seconds divide by 60 is 80 minutes which is 1 hour and 20 minutes of cutting time. That is .67 per minute labor or $53.60, 1 cutter required at $118.85 then sharpening after the job.
Also these cutters are not just for Mag drills they can be used on stationary machines as well, ie: Drill Presses. For more information please check out Champion Cutting Tools web site at: http://championcuttingtool.com/

So which one would you chose?????

Thursday, October 17, 2013

CUTTING TOOLS AS SOPHISTICATED AS THE MACHINES THAT RUN THEM

This is only one of the headers on the NEW Champion Cutting Tool website. The people at Champion have done a great job with this site as it has a lot more technical info to help you get the most life out of your Champion tooling. Visit us at Bi-Metal Industrial Products Inc. for your next Champion product.

Tuesday, October 1, 2013

Today Bi-Metal would like to thank our good friends at Champion Cutting Tools for their technical knowledge on tapping.
For more info you may contact Champion Cutting Tools

Friday, September 20, 2013

Well Bi-Metal Industrial Products Inc. is back on the web with a NEW website that is cleaner and more user friendly. Check it out at www.bimetalinc.com.

We at Bi-Metal, are presently in the planning of an ABMAST blitz promo. ABMAST recently was bought out by the SB&D group. The SB&D group had already been using the ABMAST products for many years. ABMAST is well know in Eastern Canada and now we are working on having the ABMAST brand more prevalent here in Western Canada. To find out more contact us at info@bimetalinc.com or any of the other ways to communicate with us.